Technical Studies (TS23)  Degree


Program Description:

The Technical Studies Associate Degree program is designed to prepare students for employment in a variety of positions in today's technical industry fields. This program offers students learning opportunities that develop higher level academic skills required for job acquisition, retention, and advancement. It is specifically open to students who have already completed another approved technical studies theory or industrial program of study. The program emphasizes a continuation of technical studies theory and practical applications necessary for successful employment. Program graduates receive an Associate of Applied Science degree in Technical Studies and will be qualified for employment as technicians.

Entrance date: Spring semester

Admission requirements:

Minimum Test Scores

ACCUPLACER NEXT GENERATION– Reading 236 ACCUPLACER- Sentence Skills 60
Writing 249 Reading Comprehension 55
Quantitative Reasoning 237 Algebra 57

High School diploma or equivalent required for admission.

Credits required for graduation: 60

General Education Core Courses 30 Credits
Area-I-Language-Arts/Communications-6-credits
ENGL 1101

Explores the analysis of literature and articles about issues in the humanities and in society. Students practice various modes of writing, ranging from exposition to argumentation and persuasion. The course includes a review of standard grammatical and stylistic usage in proofreading and editing. An introduction to library resources lays the foundation for research. Topics include writing analysis and practice, revision, and research. Students write a research paper using library resources and using a formatting and documentation style appropriate to the purpose and audience.

3
ENGL 1102
Prerequisite: ENGL 1101

Emphasizes the student's ability to read literature analytically and meaningfully and to communicate clearly. Students analyze the form and content of literature in historical and philosophical contexts. Topics include reading and analysis of fiction, poetry, and drama; research; and writing about literature.

3
Program Specific Gen Ed Course Requirements-6 credits
ECON 1101

Provides a description and analysis of economic operations in contemporary society. Emphasis is placed on developing an understanding of economic concepts and policies as they apply to everyday life. Topics include basic economic principles; economic forces and indicators; capital and labor; price, competition, and monopoly; money and banking; government expenditures, federal and local; fluctuations in production, employment, and income; and United States economy in perspective

3
SPCH 1101

Introduces the student to the fundamentals of oral communication. Topics include selection and organization of materials, preparation and delivery of individual and group presentations, analysis of ideas presented by others, and professionalism.

3
Area-II-Social-Behavioral-Sciences-6-credits
PSYC 1101

Introduces the major fields of contemporary psychology. Emphasis is on fundamental principles of psychology as a science. Topics include research design, the organization and operation of the nervous system, sensation and perception, learning and memory, motivation and emotion, thinking and intelligence, lifespan development, personality, psychopathology and interventions, stress and health, and social psychology.

3
SOCI 1101

Explores the sociological analysis of society, its culture, and structure. Sociology is presented as a science with emphasis placed on its methodology and theoretical foundations. Topics include basic sociological concepts, socialization, social interaction and culture, social groups and institutions, deviance and social control, social stratification, social change, and marriage and family.

3
POLS 1101

Emphasizes study of government and politics in the United States. The focus of the course will provide an overview of the Constitutional foundations of the American political processes with a focus on government institutions and political procedures. The course will examine the constitutional framework, federalism, civil liberties and civil rights, public opinion, the media, interest groups, political parties, and the election process along with the three branches of government. In addition, this course will examine the processes of Georgia state government. Topics include foundations of government, political behavior, and governing institutions.

3
Area-III-Natural-Sciences-Mathematics-6-credits
MATH 1111

Emphasizes techniques of problem solving using algebraic concepts. Topics include fundamental concepts of algebra, equations and inequalities, functions and graphs, and systems of equations; optional topics include sequences, series, and probability or analytic geometry.

3
MATH 1101

Emphasizes functions using real-world applications as models. Topics include fundamental concepts of algebra; functions and graphs; linear, quadratic, polynomial, exponential, and logarithmic functions and models; systems of equations; and optional topics in algebra.

3
MATH 1113
Prerequisite: MATH 1111

Prepares students for calculus. The topics discussed include an intensive study of polynomial, rational, exponential, logarithmic, and trigonometric functions and their graphs. Applications include simple maximum and minimum problems, exponential growth and decay.

3
Area-IV-Humanities-Fine-Arts-6-credits
HUMN 1101
Prerequisite: ENGL 1101

Explores the philosophic and artistic heritage of humanity expressed through a historical perspective on visual arts, music, and literature. The humanities provide insight into people and society. Topics include historical and cultural developments, contributions of the humanities, and research.

3
ENGL 2130
Prerequisite: ENGL 1101

Emphasizes American literature as a reflection of culture and ideas. A survey of important works in American literature. Includes a variety of literary genres: short stories, poetry, drama, nonfiction, and novels. Topics include literature and culture, essential themes and ideas, literature and history, and research skills.

3
Occupational Courses-3 credits
COMP 1000

Introduces the fundamental concepts, terminology, and operations necessary to use computers. Emphasis is placed on basic functions and familiarity with computer use. Topics include an introduction to computer terminology, the Windows environment, Internet and email, word processing software, spreadsheet software, database software, and presentation software.

3
Technical Specialty (27) (MINIMUM OF 20 OF THESE CREDITS MUST BE FOCUSED IN ONE DISCIPLINE) 27
AUTOMOTIVE TECHNOLOGY (Embedded TCCs – AH21, AE61 and AE51)-27 cr. hrs. 27
AUTT 1010

Introduces basic concepts and practices necessary for safe and effective automotive shop operations. Topics include: safety procedures; legal/ethical responsibilities; general service; hand tools; shop organization, management, and work flow systems.

2
AUTT 1020
Corequisite: AUTT 1010

Introduces automotive electricity, emphasizes the basic principles, diagnosis, and service/repair of batteries, starting systems, starting system components, alternators and regulators, lighting system, gauges, horn, wiper/washer, and accessories.

7
AUTT 1040
Corequisite: AUTT 1020

Introduces basic engine performance systems which support and control four stroke gasoline engine operations and reduce emissions. Topics include: general engine diagnosis, computerized engine controls and diagnosis, ignition system diagnosis and repair, fuel and air induction, exhaust systems, emission control systems diagnosis and repair, and other related engine service.

7
AUTT 1060
Prerequisite: AUTT 1020

Introduces the theory and operation of automotive heating and air conditioning systems. Students attain proficiency in inspection, testing, service, and repair of heating and air conditioning systems and related components. Topics include: a/c system diagnosis and repair; refrigeration system component diagnosis and repair; heating, ventilation, and engine cooling systems diagnosis and repair; operating systems and related controls diagnosis and repair; refrigerant recovery, recycling, and handling.

5
AUTT 2010

This course introduces the student to automotive engine theory and repair, placing emphasis on inspection, testing, and diagnostic techniques for both 2 cycle and 4 cycle internal combustion engines.  Topics include general engine diagnosis; removal and reinstallation; cylinder heads and valve trains diagnosis and repair; engine blocks assembly diagnosis and repair; lubrication and cooling systems diagnosis and repair.

6
ELECTRICAL CONSTRUCTION (Embedded TCCs - BE11 and ESA1)-21 cr. hrs. 21
IDFC 1007

Provides an in-depth study of the health and safety practices required for maintenance of industrial, commercial, and home electrically operated equipment. Topics include: introduction to OSHA regulations; safety tools, equipment, and procedures; and first aid and cardiopulmonary resuscitation.

2
ELTR 1020

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
ELTR 1060

Introduces electrical symbols and their use in construction blueprints, electrical schematics, and diagrams. Topics include: electrical symbols, component identification, print reading and scales and measurement.

2
ELTR 1180

Introduces line and low voltage switching circuits, manual and automatic controls and devices, and circuits. Emphasis will be placed on switching circuits, manual and automatic controls and devices, line and low voltage switching circuits, and operation, application and ladder diagrams. Topics include: ladder and wire diagrams, switching circuits, manual controls and devices, automatic controls and devices, and application and operation of controllers and controls.

4
ELTR 1220

Introduces operational theory, systems terminology, PLC installations, and programming procedures for programmable logic controls. Emphasis is placed on PLC programming, connections, installations, and start-up procedures. Topics include: PLC hardware and software, PLC functions and terminology, introductory numbering systems, PLC installation and set up, PLC programming basics, relay logic instructions, timers and counters, connecting field devices to I/O cards, and PLC safety procedures.

4
Select one of the following Direct Current (DC) courses 3
ELTR 1010

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices..

3
IDSY 1101

This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series; parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
IDFC 1011
Corequisite: MATH 1012

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
Select one of the following Alternating Current (AC) courses 3
ELTR 1020

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDFC 1012
Corequisite: IDFC 1011

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDSY 1105

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.

3
ENGINEERING GRAPHICS (Embedded TCCs - AR11, DA31 and EF11)- 23 cr. hrs. 23
ENGT 1000

Provides a study of engineering technology as a career field and describes the knowledge and skills required for academic and occupational success. Topics include: engineering technology career, measurement and standards, mathematical operators, engineering tools, and engineering concepts. Lads reinforce mathematical, mechanical and electrical concepts through practical exercises, such as measurement and calculations of density of objects, relative humidity, use of a digital multi-meter, building circuits, use of precision instruments, and team exercises.

3
DFTG 1101
Corequisite: COMP 1000

Establishes safety practices as they relate to a drafting environment. Introduces basic CAD functions while presenting essential principles and practices for line relationships, scale, and geometric construction.

4
DFTG 1103
Prerequisite: DFTG 1101

Technical Drawing I provides multiview and pictorial sketching, orthographic drawing and fundamental dimensioning methods necessary to develop 2D and 3D views that completely describe machine parts for manufacture using intermediate CAD software techniques.

4
DFTG 1105

In the 3D Mechanical Modeling course, the student becomes acquainted with concepts of the software related to Parametric modeling for mechanical drafting. The student will develop the skills necessary to create 3D models and presentation/working drawings.

4
DFTG 1125

Introduces architectural fundamental principles and practices associated with architectural styles and drawing. Fundamentals residential and commercial practices will be covered. Topics include: specifications and materials; architectural styles, construction drawing practices and procedures, dimensioning and scales.

4
DFTG 1127

In the Architectural 3D Modeling course, the student becomes acquainted with concepts of the software related to Parametric modeling for Architectural drafting. The student will develop the skills necessary to create 3D models and presentation/constructions drawings.

4
MECHATRONICS (Embedded TCCs – IE21 and IM21)-28 cr. hrs. 28
IDSY 1005

This course provides an introduction to the field of mechatronics and automation technology. Topics include automation technology as a part of engineering sciences, fundamentals of electrical engineering, sensors, fundamentals of pneumatics, electrical drives, applications of relays in electropneumatics, and programmable logic controllers.

4
IDSY 1100

This course introduces direct current concepts and applications, alternating current theory and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, series, parallel, and simple combination circuits, inductance and capacitance, diodes and amplifiers, and semiconductor fundamentals.  

5
IDSY 1110

This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls, theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting.

4
IDSY 1120
Corequisite: IDSY 1110

This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications.

4
IDSY 1130

Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors.

4
Select one of the following Alternating Current (AC) courses 3
ELTR 1020

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDFC 1012
Corequisite: IDFC 1011

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDSY 1105

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to, electrical laws and principles, magnetism, inductance and capacitance.

3
Select one of the following Direct Current (DC) courses 3
ELTR 1010

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices..

3
IDSY 1101

This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series; parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
IDFC 1011
Corequisite: MATH 1012

Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
WELDING (Embedded TCCs – FS31, FC61 and GM31)- 20 cr. hrs. 20
WELD 1000

Provides an introduction to welding technology with an emphasis on basic welding laboratory principles and operating procedures. Topics include: industrial safety and health practices, hand tool and power machine use, measurement, laboratory operating procedures, welding power sources, welding career potentials, and introduction to welding codes and standards.

4
WELD 1010
Corequisite: WELD 1000

Introduces fundamental principles, safety practices, equipment, and techniques necessary for metal heating and oxyfuel cutting. Topics include: metal heating and cutting principles, safety procedures, use of cutting torches and apparatus, metal heating techniques, metal cutting techniques, manual and automatic oxyfuel cutting techniques, and oxyfuel pipe cutting. Practice in the laboratory is provided.

4
WELD 1040
Corequisite: WELD 1000

This course introduces the major theory, safety practices, and techniques required for shielded metal arc welding (SMAW) in flat positions. Qualification tests, flat position, are used in the evaluation of student progress toward making industrial welds.

4
WELD 1090
Corequisite: WELD 1000

Provides knowledge of theory, safety practices, equipment and techniques required for successful gas metal arc welding. Qualification tests, all positions, are used in the evaluation of student progress toward making industrial standard welds. Topics include: GMAW safety and health practices; GMAW theory, machines, and set up; transfer modes; wire selection; shielded gas selection; and GMAW joints in all positions.

4
WELD 1153
Prerequisite: WELD 1000

Provides knowledge of theory, safety practices, equipment, and techniques required for successful flux cored arc welding (FCAW). Qualification tests, all positions, are used in the evaluation of student progress toward making industrial standards welds. Topics include: FCAW safety and health practices, FCAW theory, machine set up and operation, shielded gas selection, and FCAW joints in all positions.

4
Faculty
Click to view profile for Joseph Ford
Program Chair

Chair/Instructor of Civil Engineering
Carlton Construction Academy, Room 114

Up one level
Programs of Study